Connecting the TW1 for the first time to a computer. Please ensure you follow ALL steps as they are all crucial to a successful connection.
NOTE: MAKE SURE STOCKBOOK IS CLOSED WHILE TRYING TO GET THE INITIAL CONNECTION
1. Turn TW1 on > Go to settings > Device settings > Bluetooth > Enable Bluetooth
2. Open Blue Soleil on your computer > Double click on the ‘sun’ and the TW1 device should appear
3. In equipment connections on TW1 go to > Data output > Bluetooth Select device > connect > window should pop upon Blue Soliel asking for passcode
4. Right-click on the TW1 icon in Blue Soleil on computer > Pair Devices > type in 0000 in the passkey section – a green chain-link icon should appear next to the TW1 icon, this indicates that it had paired
5. Right-click on the TW1 icon > select connect Bluetooth serial port – at this point, the TW1 will show no connected devices
6. There should be a pop-up screen that briefly tells you that there is an establishing connection
NOTE: to identify what comport is being used open Blue Soleil > click on the TW1 icon
7. The TW1 icon will be green with a dotted line connecting to the ‘sun’
8. Go to device settings on TW1 > connected devices on TW1 will now show the name of the connected device/computer > should show the computer name (Ruddweigh) if not: > select > settings > type > select Ruddweigh > save
9. After connecting close Blue Soleil on the computer by hitting x at the top right-hand corner
10. Press the home button on the TW1 > select new session >use last sessions settings > TW1 is now ready for weighing
11. Open Stockbook > go to Electronic ID > setup > go to scales in setup devices
12. In scales drop-down list select Gallagher/Ruddweigh Km300..800 > go to manual setup and select the correct comport. Refer to NOTE: under step 6 to verify comport
NOTE: DO NOT TOUCH ANY FURTHER SETTINGS ON THIS WINDOW
13. Go to Live Entry > you will see scales port is now open > Start Live Entry
*********
NOTE: Make sure only the following options are ticked in Equiptment Connections | Data Output | Settings | View Options, on the TW1 : Send Prefix, Send Weight State, Send Units, Request Mode. All other settings on this screen should be unticked.
*********